Neoseiulus Cucumeris (Thripex) – 50,000 Tube (THRI2)

Thripex is a biological control product containing the predatory mite species Neoseiulus cucumeris (formerly Amblyseius cucumeris), formulated for the suppression of thrips larvae, particularly Frankliniella occidentalis and Thrips tabaci. The mites actively search for and feed on first and second instar larvae, preventing population buildup and reducing crop damage. Loose application allows for instant establishment of predatory mites.

Pack size: 50,000 Neoseiulus cucumeris predatory mites. Presentation: 1 litre bottle. Carrier: Vermiculite and a fraction of bran

Technical Comments

Combined use: Can be combined with Orius spp.. Do not combine with other generalist predatory mites (Amblyseius swirskii, Amblydromalus limonicus, Transeius montdorensis, Amblyseius andersoni).

Activity / Control

Predatory mites pierce their prey with their sucking mouthparts and suck out the contents. Environmental conditions: Neoseiulus cucumeris is most effective at temperatures between 15 and 25°C (59 and 77°F). It is not effective at temperatures above 30°C/86°F. Neoseiulus cucumeris is sensitive to relative humidity below 70%.

Application Method

Turn and shake the bottle or bucket gently before use Bottle: Push the centre of the cap to open the dosage hole Sprinkle material on leaves or put small heaps on soil. Make sure the material remains on the introduction site for at least a few hours after introduction. Choose at least 4,000 introduction points per hectare, evenly distributed over the total surface. Can also be applied with Natutec Airobreez, Natutec Mini-Airbug, Natutec Airbug or Natutec Airobug.

Storage time after receipt: Apply as soon as possible after receipt. If necessary, the product can be stored for 1-2 days. Storage temperature: 10-15°C/50-59°F. Storage conditions: In the dark, provide ventilation to prevent CO2 accumulation.

Application Rate

The dosage of Thripex depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction as soon as the first pest mites are detected in the crop. Introduction rates typically range from 50-100 per m2/release. Releases should be repeated if necessary.